Pipe Fittings :Butt Welding Cap OD:16" SCH-80 Alloy 718 ASTM/UNS N07718
| Pipe Fittings :Butt Welding Cap OD:16" SCH-80 Alloy 718 ASTM/UNS N07718 |
| MATERIAL | Carbon Steel : |
| | ASTM, A234WPB, A234WPC, A420WPL6 ,Q235,10#, A3, Q235A, 20G,16Mn, |
| | DIN St37, St45.8, St52.4,St.35.8,St.35.8. |
| | Stainless Steel: |
| | 1Cr18Ni9Ti 0Cr18Ni9 00Cr19Ni10 0Cr17Ni12Mo2Ti |
| | 00Cr17Ni14Mo2 304 304L 316 316L |
| | Alloy Steel: |
| | 16Mn Cr5Mo 12Cr1MoV 10CrMo910 15CrMo 12Cr2Mo1, |
| | A335P22 St45.8, ASTM A860 WPHY X42 X52 X60 X70 |
| STANDARD | ASTM / JIS / DIN / BS / GB/GOST |
| MODEL | 1.Tee(Straight ) |
| | 2.Tee(Reducing) |
| TYPE | Seam Or Seamless |
| SURFACE | Black Paint, Anti Rust Oil, Hot-Dipped Galvanize |
| WALL THICKNESS | SCH5S,SCH10S,SCH10,SCH20,SCH30,SCH40,STD,XS,SCH60, |
| | SCH80,SCH100,SCH120,SCH140,SCH160,XXS,2MM |
| SIZE | 1/2"-48"(Dn15-Dn1200) |
| CONNECTION | Welding |
| SHAPE | Equal, Reducing |
| CERTIFICATE | ISO9001 SGS/BV/ABS/LR/TUV/DNV/BIS/API/PED |
| APPLICATION | Petroleum, chemical, power, gas, metallurgy, shipbuilding, construction, etc |
| RELATED PRODUCTS | 1. Carbon steel nipples and sockets | 2. Flanges |
| | 3. Malleable iron pipe fittings | 4. Pipes |
| | 5. High-pressure fittings | 6. Valves |
| | 7. P.T.F.E .thread seal tape | 8. Brass fittings |
| | 9. Ductile iron pipe fittings | 10. Copper fittings |
| | 11. Sanitary fittings, etc,. | 12. Grooved fittings |
| Customers’ drawings or designs are available. |
| PACKAGE | 1> 1/2" - 2" in cartons. |
| | 2>Above 2" in wooden cases. |
| | Big size is workable by pallets. |
| DELIVERY DETAILS | According to the quantities and specifications of each order. |
| | Normal delivery time is from 15 to 30working days after receiving the deposit. |
Introduction
Butt welded pipe cap is a pipe fitting welded to the end of the steel pipe to cover and plug the pipe. It is used to close the pipeline, and its function is the same as that of pipe plug and plug. The appearance of butt welded pipe cap is various, mainly including convex, conical shell, reducing section, flat cover and tight mouth
Overview and features:Alloy 718
N07718 / no7718 is a Fe Ni Cr Based precipitation hardening deformed superalloy, with a long-term service temperature range of - 253 ~ 650 ℃, a short-term service temperature of 800 ℃, high strength, good toughness below 650 ℃ and oxidation and corrosion resistance in high and low temperature environment. And good processability, weldability and long-term structural stability
N07718 / no7718 cold and hot working: the appropriate hot working temperature of the alloy is 1120-900 ℃. The cooling method can be water quenching or other rapid cooling methods. After hot working, it should be annealed in time to ensure good performance. During hot processing, the material shall be heated to the upper limit of processing temperature. In order to ensure the plasticity during processing, the final processing temperature when the deformation reaches 20% shall not be lower than 960 ℃. The cold working shall be carried out after solution treatment, and the work hardening rate is greater than that of austenitic stainless steel. Therefore, the processing equipment shall be adjusted accordingly, and there shall be an intermediate annealing process in the cold working process.
Q1: Are you trading company or manufacturer ?
A: We are factory.
Q2: How long is the delivery ?
A: 15-30 working days
Q3: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
If you want to get more information of the products, send me e-mail or by skype, whatsapp etc.
.
If any questions,you can call me mobile phone at any times:0086-15710108231
|
|
Pipe Fittings :Butt Welding Cap OD:16" SCH-80 Alloy 718 ASTM/UNS N07718 Images
|
